|
|
 LAG
'FR' - 1.0 lb.per sq. ft. loaded vinyl barrier
with reinforced aluminum foil facing is
an excellent acoustical pipe / duct lagging. It can be used
on its own or as a barrier cover for over wraps like fibreglass
or polyethylene foams commonly used on piping, ductwork and
plenums.
The vinyl provides mass and flexibility while the aluminum
foil adds increased mechanical strength, weatherability, an
attractive appearance and improved fire retardancy.
|
 LAG
'FRC' - 1.0 lb. per sq.
ft. loaded vinyl barrier with reinforced aluminum foil facing
and nominal 1" thick quilted fiberglass decoupler. This
decoupling layer allows the vinyl barrier to float independently
of the noise source for maxium performance. The fibreglass
also provides a thermal break for applications where high
continuous heat is present.
|
Lag
'FR' and 'FRC' have an operation temperature of 40 to 220°
F.
|
| Applications: |
| •
Residential and Commercial – Soil and Water Pipes
• Process Piping
• Duct
Work
• Heat
Exchangers
• Valves
• Mixing
Boxes
• Material Transfer Lines
• Petro-Chemical and Wastewater Treatment Plants
• Gas UtilityPressure-Reducing Stations
• Commercial and Residential H.V.A.C. Applications
|
| Benefits: |
STC
- Up to 27.
Fire Safe - Meets Class 1 when properly installed. Low
smoke and flame spread.
Easy Installation - Using bands, matching lag tape or
mechanical fasteners.
No Down Time - Can be installed during normal equipment
operation. No shut down required.
Durable - Tear and puncture resistance. Offers moisture,
oil and chemical resistance. Will not rot, shrink or cause metal
corrosion. |
| Composite
Cross Section: |
 The
LAG 'FR' barrier only component is available in
54" X 30' rolls. The composite LAG 'FRC' is also available
in
54" x 30' rolls.
The composite allows for a 1 step installation process. This
reduces installation labor and enhances noise reduction properties.
LAG 'FR' and 'FRC' can be held in place using duct tape, adhesives,
nylon ties or mechanical fasteners.
For proper fire rating installation, FSK tape should be used
to seal and cover material edges and seams.
|
Lag
FR &FRC Data Sheet PDF Format
Click
here for a free Adobe Acrobat Reader to view PDF files
|
