LAG 'FR' - 1.0 lb.per sq. ft. loaded vinyl barrier with reinforced aluminum foil facing is an excellent acoustical pipe / duct lagging. It can be used on its own or as a barrier cover for over wraps like fibreglass or polyethylene foams commonly used on piping, ductwork and plenums.

The vinyl provides mass and flexibility while the aluminum foil adds increased mechanical strength, weatherability, an attractive appearance and improved fire retardancy.

LAG 'FRC' - 1.0 lb. per sq. ft. loaded vinyl barrier with reinforced aluminum foil facing and nominal 1" thick quilted fiberglass decoupler. This decoupling layer allows the vinyl barrier to float independently of the noise source for maxium performance. The fibreglass also provides a thermal break for applications where high continuous heat is present.

• Residential and Commercial – Soil and Water Pipes
• Process Piping
• Duct Work
• Heat Exchangers
• Valves
• Mixing Boxes
• Material Transfer Lines
• Petro-Chemical and Wastewater Treatment Plants
• Gas UtilityPressure-Reducing Stations
• Commercial and Residential H.V.A.C. Applications

The LAG 'FR' barrier only component is available in
54" X 30' rolls. The composite LAG 'FRC' is also available in
54" x 30' rolls.

The composite allows for a 1 step installation process. This reduces installation labor and enhances noise reduction properties.

LAG 'FR' and 'FRC' can be held in place using duct tape, adhesives, nylon ties or mechanical fasteners.

For proper fire rating installation, FSK tape should be used to seal and cover material edges and seams.