• Airborne and structure-borne noise transmission reduction
• Mechanical equipment isolation

• Made from 100% recycled automobile tires,bonded with a permanently   elastic polyurethane binder
• Meets all established indoor air quality standards
• Qualifies for LEED ® points
• Bacteria and fungi resistant
• No potential mold producing fiberglas
• Waterproof (dependent on installation)
• Can be safely loaded up to 2000psf
• Thermally stable between 0°F and 350°F
• Foolproof roll-in-place installation mean no mistakes
• Requires no additional form work
• No equipment loads or locations to coordinate
• Water resistant

Iso-Sep 25HD has a natural frequency of 10 Hz independent of the loading and detection to ensure consistent high performance.

HOW TO SPECIFY:
Isolation pad shall be “Iso-Sep 25HD” as supplied by Wilrep Ltd.
Isolation pad shall be installed ‘bumpy side down’ with seams tight
between sheets and room perimeters.
Perimeter Isolation Board Type AF-PIB by Wilrep Ltd. shall be
installed against all room edges and penetrations. Before reinforcing
steel or concrete placement, 6 mil polyethylene sheeting shall
be placed over the isolation pad and up against the perimeter
isolation board with seams tight and taped.